Tron ML-200 Maker Light

Description

The Daniamant ML-200 marker light series has high intensity LEDs and is powered by a special high capacity battery pack at 4.5 VDC

The Daniamant ML-200 standard series consist of:

Daniamant ML-200 yellow LED 25 flash at 5 candela marking light.
Daniamant ML-200 white LED 25 flash at 5 candela marking light.
Daniamant ML-200 Synch Master.
The following marker light features can be changed by programming:

Light-intensity
Flash-rate
Synchronization as master/slave
Daylight switch (with adjustable ambient light level for ON/OFF)
The Daniamant ML-200 series is developed for marking of e.g. nets and long line fishing equipment, buoys, seismic cables, anchor chains and moorings, fish farms, oil cables and offshore installations. The ML-series has a module-based construction, which makes these marking lights user-friendly during any service and repair.

When is a Daniamant ML-200 Synch Master needed?
If one ML-light is programmed as “Master” and the other lights are programmed as “Slaves” and the distance between “Master” and “Slaves” are less than 90-100 meters, synchronization should function OK. All lights in the ML-series (ML-100, ML-200 and ML-300) can be programmed as either “Master” or “Slave”.

If the distance between “Master” and “Slaves” is between 100-450 meters, a dedicated Synch-Master must be used. This device can be powered at 4.5 VDC or 10-27 VDC battery and fit to the houses used for ML-100, ML-200 and ML-300.

Read more3